-RGB.1708361192.png){kind=logo}
You’re in good company. We’ve worked with the following commercial clients… View all
Localised Resin Patch Repairs
A resin patch repair fixes a localised crack or defect without relining or excavating the whole pipe run.
Got a Localised Crack or Defect? Here's How We Fix It
Not every defect needs a full lining job or an excavation. When a drain has a single localised crack, fracture, or hole, a resin patch repair can fix that exact spot from within the pipe, without disturbing the rest of the run.
Our engineers will use CCTV to confirm the exact location of the defect, clean the pipe to prepare the surface, then position and cure a resin patch over the damaged section so it bonds securely to the pipe wall. We'll verify the repair before finishing up.
Contact our friendly team by calling 0203 870 1067 or sending an email to contactus@icedrainage.co.uk to learn more about our localised resin patch repair services.
Rated 4.9 on Google
Speak with me today,
I’m here to help
By asking you a few questions either via phone or email I can immediately provide a realistic estimation of the cost.
Our localised resin patch repairs treatment process
Step 1 Contact
Get in touch if a survey has found a short crack, defective joint, small hole or other isolated section of damage. Sending the CCTV report or footage helps us assess suitability quickly. If the defect has not been accurately located, we can survey the drain first to establish whether a local resin patch is preferable to a longer liner or excavation.
Step 2 Quote
We confirm the pipe diameter, material, defect length, access route and surrounding condition. A patch is recommended only where a focused repair can provide an effective result. The quotation defines the preparation, approximate repair location and patching scope, avoiding the cost and disruption of treating sound pipe unnecessarily.
Step 3 Works
The pipe is thoroughly cleaned and prepared before the resin-impregnated repair material is positioned over the damaged area using specialist installation equipment. It is held firmly against the host pipe while it cures, creating a new local structural layer across the defect. The equipment is then removed and the line is cleared for normal use.
Step 4 After care
A post-repair check confirms that the patch has cured in the intended position, the internal transition is acceptable and the drainage route remains clear. We advise if the rest of the surveyed pipework is in good condition or if other defects should be monitored. Future CCTV inspections can be scheduled where the wider system is ageing or heavily used.
Emergency Hotline
0203 870 1067
Helpline open 24 hours a day, 7 days a week
When calling please have
the following ready:
- Your Name
- Company Name (if applicable)
- Site Postcode
- The problem you're having
- Email Address
Get a Quote
Resin Patch Repairs FAQs
The basics
When is a patch repair used instead of full relining?
When the damage is limited to a small section, rather than running along the whole pipe.
What is a resin patch repair?
It's a localised repair that seals a specific crack or defect using a resin-based patch, without relining the whole pipe.
Is a patch repair as durable as relining?
For a localised defect, yes, it's a durable, long-lasting fix.
Does this require any digging?
No, it's a no-dig repair carried out from inside the pipe.
Can you confirm the repair has worked afterwards?
Yes, we can run a camera check to confirm the patch is sealed properly.
On the day
How long does a patch repair take?
Most patch repairs are completed within a few hours.
Why choose us?
- Cater to a wide variety of drainage situations
- Nationwide coverage, available 24/7
- Cater to commercial and domestic clients
- Free survey provided prior to quotation
- Emergency response team
- Offer a bespoke service designed to suit all your needs
- All technicians hold professional health and safety qualifications