Grease Trap Maintenance for Commercial Kitchens

What is a grease trap? Why grease traps matter (and what happens when they fail) Grease trap servicing requirements in the UK Warning signs your grease trap needs emptying What to do if you have a grease-related blockage or overflow How to prevent FOG problems Contact us today

Grease-related drainage issues are one of the most common causes of emergency call-outs for restaurants, pubs, hotels and commercial kitchens. When fat, oil and grease (FOG) cools, it solidifies inside pipework, restricts flow and can quickly lead to blocked sinks, foul odours, slow drains, kitchen downtime and even sewage back-ups.

Here at ICE Drainage, we provide grease trap emptying, cleaning and planned maintenance for hospitality sites, alongside 24/7 emergency response when things go wrong. If it’s urgent, our drainage engineers can attend quickly to contain the issue, clear the blockage and get your kitchen operational again.

Continue reading to find out how grease traps work, what to do when you have a FOG-related incident, and how to prevent repeat blockages.

What is a grease trap?

A grease trap (sometimes called a grease interceptor, depending on size and application) is a device installed on kitchen waste lines to capture fats, oils and grease before they enter the drainage system.

It works by slowing the flow of wastewater so FOG can float to the top while heavier food solids settle. Cleaner water then exits to the drain. Over time, the trapped grease and solids build up and must be removed.

In simple terms: a grease trap is there to protect your pipework, prevent blockages and reduce the risk of pollution incidents.

Why grease traps matter (and what happens when they fail)

When grease traps aren’t maintained, FOG can pass into the drainage system and cause:

• Blocked sinks, dishwashers and floor drains
• Kitchen downtime and loss of service
• Foul odours and hygiene issues
• Overflows that create slip hazards and contamination risks
• Drainage back-ups that can affect neighbouring units (especially in multi-tenant sites)
• Increased emergency call-outs and higher reactive costs

For hospitality businesses, the biggest impact is usually operational: you can’t run a kitchen properly with slow drainage, odours or repeated blockages.

Grease trap servicing requirements in the UK

There isn’t one single “grease trap law” that applies identically to every site, but commercial kitchens are expected to manage FOG responsibly.

In practice, that means:

• Grease traps must be maintained so they function correctly
• Waste must be removed and disposed of via licensed waste carriers
• Sites should be able to evidence servicing (especially where landlords, facilities managers or auditors require it)

A sensible approach is to treat grease trap maintenance as part of your planned preventative maintenance (PPM) programme. This reduces emergency incidents and helps demonstrate good housekeeping.

If you manage multiple sites, standardising service intervals and record-keeping across the estate makes a noticeable difference.

Warning signs your grease trap needs emptying

If you spot any of the below, it’s usually time to book a service:

• Persistent bad smells around sinks, gulleys or the grease trap location
• Slow draining sinks or dishwashers
• Gurgling sounds in pipework
• Frequent minor blockages that keep returning
• Grease trap visibly full (grease layer and solids build-up)
• Overflowing or leaking grease trap
• Staff reporting “it always blocks on busy shifts”

Tip: if you’re only servicing after you get a blockage, you’re already paying the reactive premium. Planned emptying is almost always cheaper than emergency attendance plus disruption.

What to do if you have a grease-related blockage or overflow

If you have an active blockage or overflow, act quickly to minimise downtime and prevent contamination.

1. Make the area safe

• Stop using affected sinks/appliances
• Put out wet floor signs and isolate the area if there’s spillage

1. Prevent more FOG entering the system

• Do not pour boiling water or chemicals down the drain (this can shift grease further down the line and make the problem worse)
• Avoid quick fixes that only move the blockage

1. Call drainage professionals A proper response typically involves identifying where the restriction is, clearing it using the correct method (often jetting), and then addressing the root cause (usually a full grease trap and/or FOG build-up in internal pipework).
2. Arrange waste removal and documentation If the grease trap needs emptying, ensure the waste is removed and disposed of correctly with the right paperwork.

At ICE Drainage, we can attend for emergency unblocking and follow up with grease trap emptying and a preventative plan so it doesn’t keep happening.

How to prevent FOG problems

The best results come from combining good kitchen practices with a planned maintenance schedule.

Implement a planned emptying schedule Service frequency depends on covers, menu type and kitchen output, but the goal is simple: don’t let the trap reach a point where grease is passing through.

Train staff on FOG best practice

• Scrape plates and cookware into food waste before washing
• Use sink strainers to reduce solids entering the line
• Never pour cooking oil down sinks
• Store waste oil in appropriate containers for collection

Keep internal pipework clean Even with a grease trap, some residue can build up over time. Periodic internal pipework cleaning helps prevent restrictions.

Use a PPM approach (especially for multi-site hospitality) A structured maintenance plan can include:

• Grease trap servicing and emptying
• Kitchen drainage cleaning
• Reactive call-out response times
• Service reports and photographic evidence
• Digital records for audits and landlords

Contact us today

ICE Drainage provides grease trap emptying, cleaning and planned maintenance for hospitality sites, plus 24/7 emergency drainage response.

To book a service or request urgent support, contact our team on 02033764801 or email contactus@icedrainage.co.uk.